Ticket 2 – HSRP Track

[phamminhtuan]

HSRP was configured on DSW1 & DSW2. DSW1 is configured to be active but it does not become active.
Configuration on DSW1:
track 1 ip route 10.1.21.128 255.255.0.0 metric threshold
threshold metric up 1 down 2
!
track 10 ip route 10.2.21.128 255.255.255.0 metric threshold
threshold metric up 63 down 64
!
interface Vlan10
ip address 10.2.1.1 255.255.255.0
standby 10 ip 10.2.1.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 60


Answer: (use IPv4 Layer 3 Topology)
On dsw 1 interface vlan 10 mode run:
no standby 10 track 1 decrement 60
standby 10 track 10 decrement 60
(ip for track command not exact for real exam)
Ans1) DSW1
Ans2) HSRP
Ans3) delete the command with track 1 and enter the command with track 10 (standby 10 track 10 decrement 60).

[giangdv]

Bác ơi,
cho em hỏi chút metric threshold là như thế nào
Em chưa hiểu cái câu này nghĩa nó là như thế nào nhỉ track 1 ip route 10.1.21.128 255.255.0.0 metric threshold
threshold metric up 1 down 2
Nên ko hiểu sao lại phải thay track1 thành track 10
Cảm ơn bác trước nhé