Nội dung chi tiết môn học CCNA 2.0 200-301

[dangquangminh]

Part I INTRODUCTION TO NETWORKING Chapter 1 Introduction to TCP/IP Networking Chapter 2 Fundamentals of Ethernet LANs Chapter 3 Fundamentals of WANs and IP Routing Part I Review

Part II IMPLEMENTING ETHERNET LANS Chapter 4 Using the Command-Line Interface Chapter 5 Analyzing Ethernet LAN Switching Chapter 6 Configuring Basic Switch Management Chapter 7 Configuring and Verifying Switch Interfaces Part II Review

Part III Implementing VLANs and STP Chapter 8 Implementing Ethernet Virtual LANs Chapter 9 Spanning Tree Protocol Concepts Chapter 10 RSTP and EtherChannel Configuration Part III Review

Part IV IPV4 ADDRESSING Chapter 11 Perspectives on IPv4 Subnetting Chapter 12 Analyzing Classful IPv4 Networks Chapter 13 Analyzing Subnet Masks Chapter 14 Analyzing Existing Subnets Part IV Review

Part V IPV4 ROUTING Chapter 15 Operating Cisco Routers Chapter 16 Configuring IPv4 Addresses and Static Routes Chapter 17 IP Routing in the LAN Chapter 18 Troubleshooting IPv4 Routing Part V Review

Part VI OSPF Chapter 19 Understanding OSPF Concepts Chapter 20 Implementing OSPF Chapter 21 OSPF Network Types and Neighbors Part VI Review

Part VII IP SERVICES Chapter 22 Configure and verify inside source NAT using static and pools Chapter 23 Configure and verify NTP operating in a client and server mode Chapter 24 Explain the role of DHCP and DNS within the network Chapter 25 Explain the function of SNMP in network operations Chapter 26 Describe the use of syslog features including facilities and levels Chapter 27 Configure and verify DHCP client and relay Chapter 28 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping Chapter 29 Configure network devices for remote access using SSH. Describe the capabilities and function of TFTP/FTP in the network Part VII Review

Part VIII SECURITY FUNDAMENTALS Chapter 30 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques). Describe security program elements (user awareness, training, and physical access control). Configure device access control using local passwords. Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics) Chapter 31 Describe remote access and site-to-site VPNs Chapter 32 Configure and verify access control lists Chapter 33 Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security) Chapter 34 Differentiate authentication, authorization, and accounting concepts

Part IX WIRELESS LANS Chapter 35 Fundamentals of Wireless Networks Chapter 36 Analyzing Cisco Wireless Architectures Chapter 37 Securing Wireless Networks. Describe wireless security protocols (WPA, WPA2, and WPA3. Configure WLAN using WPA2 PSK using the GUI Chapter 38 Building a Wireless LAN. Configure WLAN using WPA2 PSK using the GUI Part IX Review

Part X IP VERSION 6 Chapter 39 Fundamentals of IP Version 6 Chapter 40 IPv6 Addressing and Subnetting Chapter 41 Implementing IPv6 Addressing on Routers Chapter 42 Implementing IPv6 Routing Part X Review

Part XI AUTOMATION AND PROGRAMMABILITY Chapter 43 Explain how automation impacts network management Chapter 44 Compare traditional networks with controller-based networking. Describe controller-based and software defined architectures (overlay, underlay, and fabric). Separation of control plane and data plane. North-bound and south-bound APIs Chapter 45 Compare traditional campus device management with Cisco DNA Center enabled device management Chapter 46 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding) Chapter 47 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible. Chapter 48 Interpret JSON encoded data Part XI Review