Tweet
Help Cấu hình pppoe trên router 1841
Em cau hinh roi nhung khi dielar thi no bao ko "no ip get from pool"
Em gui phan em cau hinh, bac nao xem ho em xem sai o cho nao
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#in
Router(config)#interface f0/0
Router(config-if)#ip add 1.1.1.1 255.0.0.0
Router(config-if)#pp
Router(config-if)#pppoe en
Router(config-if)#pppoe enable
Router(config-if)#exit
Router(config)#interface f0/0
Router(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#interface virtual-Template
Router(config)#interface virtual-Template 1
Router(config-if)#ip unnumbered fastEthernet 0/0
Router(config-if)#peer default ip address pool mypool
Router(config-if)#pp
Router(config-if)#ppp au
Router(config-if)#ppp authentication cha
Router(config-if)#ppp authentication chap
AAA: Warning, authentication list default is not defined for PPP.
Router(config-if)#exit
Router(config)#vpdn en
Router(config)#vpdn enable
Router(config)#vpdn-
Router(config)#vpdn-group ?
WORD VPDN Group name
Router(config)#vpdn-group mygroup
Router(config-vpdn)#accept-dialin
Router(config-vpdn-acc-in)#virtual-template 1
% PPPoE config from vpdn-group is converted to pppoe-profile based config.
% Continue PPPoE configuration under 'bba-group pppoe global'
Router(config-vpdn-acc-in)#exit
Router(config-vpdn)#exit
Router(config)#ip loc
Router(config)#ip local p
Router(config)#ip local pool mypool 1.1.1.10 1.1.1.20
Router(config)#user
Router(config)#username cisco pas
Router(config)#username cisco password cisco
Router(config)#exit
Comment