Tweet
User Access Verification
Username: rvice-Engine0/0, changed state to administratively down
*Nov 13 06:35:07.187: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Nov 13 06:35:08.239: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 26-Feb-13 02:11 by prod_rel_team
*Nov 13 06:35:08.279: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoing a cold start
*Nov 13 06:35:08.899: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Nov 13 06:35:08.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Username:
Username: cisco
Password:
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
-----------------------------------------------------------------------
yourname#
sau đó mình quyên đồi user/pass giờ phải làm sao ?
Username: rvice-Engine0/0, changed state to administratively down
*Nov 13 06:35:07.187: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*Nov 13 06:35:08.239: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 26-Feb-13 02:11 by prod_rel_team
*Nov 13 06:35:08.279: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoing a cold start
*Nov 13 06:35:08.899: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Nov 13 06:35:08.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Username:
Username: cisco
Password:
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
-----------------------------------------------------------------------
yourname#
sau đó mình quyên đồi user/pass giờ phải làm sao ?
Comment