Tweet
Cấu hình lệnh hostname và wr lại thì kết quả như vậy nè: ko hiểu là lỗi gì? Sau khi gõ lệnh wr thì nó boot lại và không thể lưu Command vừa gõ:
SGQuan1_1721(config)#hostname R_1721
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#end
R_1721#wr
Unexpected exception to CPUvector 1200, PC = 809D39A4
-Traceback= 809D39A4 8029B52C 8029BC68 80207DAC 8012A7A0 8012A6EC 8015B830 8014D224 8015E8CC 801FD068 80200718
Writing crashinfo to flash:crashinfo_19930301-000151
Queued messages:
*Mar 1 00:01:51.423: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 00:01:50.387: %SYS-5-CONFIG_I: Configured from console by console
*** System received a SegV exception ***
signal= 0xb, code= 0x1200, context= 0x80ed49b8
PC = 0x809d39a4, Vector = 0x1200, SP = 0x812397f8
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 98304 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x542624
Self decompressing the image : ################################################## ################################################# [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
MainBoard 0X00027A80 1721
0X000F3BB0 public buffer pools
0X00211000 public particle pools
0X0012 0X0001B800 Card in slot 0
0X0037 0X00007800 Card in slot 1
TOTAL: 0X0034F630
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 14815589 bytes to IO Memory.
PMem allocated: 83886080 bytes; IOMem allocated: 16777216 bytes
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 20:01 by dchih
Image text-base: 0x80008120, data-base: 0x809DA464
cisco 1721 (MPC860P) processor (revision 0x300) with 81920K/16384K bytes of memory.
Processor board ID FOC08032NJP (1694730079), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Serial(sync/async) network interface(s)
2 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
modem firmware slot 2 location
% Incomplete command.
This command has no effect on this line; use modem AT commands instead
This command has no effect on this line; use modem AT commands instead
Và đây là lệnh Show version:
SGQuan1_1721#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 20:01 by dchih
Image text-base: 0x80008120, data-base: 0x809DA464
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
SGQuan1_1721 uptime is 35 minutes
System returned to ROM by address error at PC 0x809D39A4, address 0x809D39A4
System image file is "flash:c1700-y-mz.123-1a.bin"
cisco 1721 (MPC860P) processor (revision 0x300) with 81920K/16384K bytes of memory.
Processor board ID FOC08032NJP (1694730079), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Serial(sync/async) network interface(s)
2 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
SGQuan1_1721(config)#hostname R_1721
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#
R_1721(config)#end
R_1721#wr
Unexpected exception to CPUvector 1200, PC = 809D39A4
-Traceback= 809D39A4 8029B52C 8029BC68 80207DAC 8012A7A0 8012A6EC 8015B830 8014D224 8015E8CC 801FD068 80200718
Writing crashinfo to flash:crashinfo_19930301-000151
Queued messages:
*Mar 1 00:01:51.423: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 00:01:50.387: %SYS-5-CONFIG_I: Configured from console by console
*** System received a SegV exception ***
signal= 0xb, code= 0x1200, context= 0x80ed49b8
PC = 0x809d39a4, Vector = 0x1200, SP = 0x812397f8
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 98304 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x542624
Self decompressing the image : ################################################## ################################################# [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
MainBoard 0X00027A80 1721
0X000F3BB0 public buffer pools
0X00211000 public particle pools
0X0012 0X0001B800 Card in slot 0
0X0037 0X00007800 Card in slot 1
TOTAL: 0X0034F630
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 14815589 bytes to IO Memory.
PMem allocated: 83886080 bytes; IOMem allocated: 16777216 bytes
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 20:01 by dchih
Image text-base: 0x80008120, data-base: 0x809DA464
cisco 1721 (MPC860P) processor (revision 0x300) with 81920K/16384K bytes of memory.
Processor board ID FOC08032NJP (1694730079), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Serial(sync/async) network interface(s)
2 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
modem firmware slot 2 location
% Incomplete command.
This command has no effect on this line; use modem AT commands instead
This command has no effect on this line; use modem AT commands instead
Và đây là lệnh Show version:
SGQuan1_1721#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 20:01 by dchih
Image text-base: 0x80008120, data-base: 0x809DA464
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
SGQuan1_1721 uptime is 35 minutes
System returned to ROM by address error at PC 0x809D39A4, address 0x809D39A4
System image file is "flash:c1700-y-mz.123-1a.bin"
cisco 1721 (MPC860P) processor (revision 0x300) with 81920K/16384K bytes of memory.
Processor board ID FOC08032NJP (1694730079), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Serial(sync/async) network interface(s)
2 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Comment